| 0
Log In |
Above $80

25% Off

Rollover image to view larger image



SKU : 111135

IN STOCK icon info



Save $9.30

Comfort Zone heaters -the highest quality standard.
Comfort Zone heater- glass aquarium heater with thermostat which contacts covered with a layer of genuine gold. Traditional glass aquarium heaters consist of a thermostat, contacts and a heating spiral. The thermostat controls the aquarium water temperature and, if the need arises, connects or disconnects the contacts, turning the heating spiral on or off. The most sensitive elements of the circuit are the contacts - despite of using electronic support, due to metal oxidation, their surface is over time subject to gradual decay. That mechanism shortens the life span of the heater and lowers the accuracy of water heating. In the newly presented, revolutionary Aquael heaterwe managed to eliminate that issue. The contacts in that device are galvanically covered with a layer of genuine gold. The metal is highly chemically inert and is practically not subject to oxidization. Application of that solution significantly extended the heater life span maintaining at the same time the accuracy of its operation. It guarantees many years of failure-free operation and complete thermal safety of the animals inhabiting the aquarium. In care of the highest quality of manufacturing, each single unit is computer-tested in professional Aquael laboratory prior to being passed to the hands of the user. The accuracy of thermostat operation is 1C.

2.9 x 2.9 x 24 cm
Recommended capacity of aquarium: 10-25 liters
Energy 25W

Usage Guidelines:
Conditions of safe usage. The device you purchased was manufactured in conformity with all safety standards currently in force on the area of European Union. For long lasting and safe usage please read the safety conditions below:
1. The device is designed for usage only indoors and accordingly to its destination.
2. The device can be powered from a power grid of voltage stated on the device.
3. The device placed outside water must not be turned on to the power grid.
4. A device that is damaged or has a damaged power cord must not be used. The condition of the power cord should be checked prior to every start-up of the device. The power cord must not be repaired, replaced or have any additional elements installed. In case of damaging the cord the entire device should be replaced.
8. After removing the device from water it should be left for a few minutes to cool.
9. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
10. CAUTION! The power cord should be connected to the electric grid in the way presented on fig. A, so that a part of the cord hangs freely below the ballast. The objective is to prevent potential flooding of the ballast with water in case of it condensing on the power cord.

For more information: Please click here

*Product image and information are correct at the time of publishing on this website. For the most accurate information and image, please refer to the actual product.